| Quantity: | |
|---|---|
| Parameter | Value |
|---|---|
| Rated heating capacity | 17kW (ambient temperature 7℃, water outlet temperature 45℃) |
| Input power | 4.67kW |
| Energy efficiency ratio | 3.64 |
| Heating capacity at low temperature -20℃ | 11.2kW |
| Stable operation at | -38℃ |
| Compressor | internationally renowned brand inverter compressor |
| Heat exchanger | hydroph ilic aluminum foil fin heat exchanger, increasing heat exchange efficiency by 15%, resistant to high humidity and corrosion |
| Fan | inverter DC fan with intelligent defrosting technology, reducing defrosting time by 30%, adaptable to different climate conditions |
| Power supply | defaults to 3-phase 380V/50Hz or 220V/50Hz |
| Rated water flow rate | 2.32m3/h |
| Body size | 998×390×1507mm |
| Weight | 158kg |
| Waterproof rating | IPX4 |
| Electrical shock protection type | Class I |
| Special resistance | resistant to typhoons and heavy rain |
Before starting the unit, check the power supply, water system, and unit status to ensure there are no abnormalities;
Start the unit and observe whether the operating parameters are normal;
Adjust the water temperature as needed, but do not set the water temperature too low or too high;
Regularly record operating data for maintenance and analysis purposes.
The installation location must be well-ventilated and protected from direct sunlight;
Take necessary precautions against freezing in low-temperature environments during winter;
Regularly clean the pipe filter and remove foreign objects from the external fins of the heat exchanger to maintain efficient operation;
Non-professional person should not disassemble the unit without authorization;
Drain the system of water when it is not in use for an extended period.
Proper operation and maintenance can extend the unit's lifespan and improve energy efficiency. Users should strictly follow the instructions in the manual and contact professional people immediately if any abnormalities occur.
| Parameter | Value |
|---|---|
| Rated heating capacity | 17kW (ambient temperature 7℃, water outlet temperature 45℃) |
| Input power | 4.67kW |
| Energy efficiency ratio | 3.64 |
| Heating capacity at low temperature -20℃ | 11.2kW |
| Stable operation at | -38℃ |
| Compressor | internationally renowned brand inverter compressor |
| Heat exchanger | hydroph ilic aluminum foil fin heat exchanger, increasing heat exchange efficiency by 15%, resistant to high humidity and corrosion |
| Fan | inverter DC fan with intelligent defrosting technology, reducing defrosting time by 30%, adaptable to different climate conditions |
| Power supply | defaults to 3-phase 380V/50Hz or 220V/50Hz |
| Rated water flow rate | 2.32m3/h |
| Body size | 998×390×1507mm |
| Weight | 158kg |
| Waterproof rating | IPX4 |
| Electrical shock protection type | Class I |
| Special resistance | resistant to typhoons and heavy rain |
Before starting the unit, check the power supply, water system, and unit status to ensure there are no abnormalities;
Start the unit and observe whether the operating parameters are normal;
Adjust the water temperature as needed, but do not set the water temperature too low or too high;
Regularly record operating data for maintenance and analysis purposes.
The installation location must be well-ventilated and protected from direct sunlight;
Take necessary precautions against freezing in low-temperature environments during winter;
Regularly clean the pipe filter and remove foreign objects from the external fins of the heat exchanger to maintain efficient operation;
Non-professional person should not disassemble the unit without authorization;
Drain the system of water when it is not in use for an extended period.
Proper operation and maintenance can extend the unit's lifespan and improve energy efficiency. Users should strictly follow the instructions in the manual and contact professional people immediately if any abnormalities occur.
