TENESUN Thermal Energy innovatively integrates cooling and ventilation system technologies to launch a low-temperature sludge drying system. It is specifically designed for sludge drying reduction projects in different fields such as municipal services, printing&dyeing, papermaking, chroming, chemical industry, leather processing, pharmaceuticals and kitchen waste. The system can dry wet sludge with a moisture content of 83% to below 30%, reducing the sludge weight by up to 80%. It helps to take tha advantage of the harmless material for subsequent incineration, composting and building materials, breaking through the limitations of traditional drying technologies.
Air source’ remaining heat sludge drying suits for the places with a stable source of industrial waste heat, such as power factories, chemical factories and steel factories. And it suits for energy-sensitive projects that handling large volumes of sludge (daily processing volumes of tens to hundreds of tons). Priority is given to areas with strict environmental protection requirements and prohibitions against waste gas and odor emissions.
Enclosed sludge dryer with belt suits for places with high requirements for dried product quality and the need for precise moisture control (e.g., 10%-30% moisture content) and it suits for projects with continuous production and uninterrupted processing requirements, such as municipal sludge and chemical sludge.Then it also suits for projects with relatively ample space and the ability to deploy continuous production lines.
Van-type sludge drying can suit for small and medium-sized projects with low sludge production (daily processing volumes of a few to tens of tons) and intermittent production, such as small sewage treatment factories and township sludge treatment stations and suit for sites with limited space that preclude the installation of large continuous equipment. And it also suit for users with a low initial investment budget and a willingness to accept batch operation.
The machines utilizes a fully enclosed heat pump system for low-temperature drying at 35°C-70°C, with the discharge temperature below 48°C. It an be direct storage without the need for secondary cooling to ensure safety and environmental protection. Depending on multiple patented heat pump technology, the machine can come true highly efficient air dehumidification and dehumidify over 4kg per hour per kilowatt of power and save over 50% energy compared to the traditional low-temperature drying equipment.
TENESUN commercial hot water air source heat pumps utilize advanced air source heat pump technology by absorbing free heat from the air to heat water. Its function is beyond the traditional electric and gas hot water heaters. This means that TENESUN air source heat pumps only need the 1/4 electricity of electric hot water heaters and 1/3 to 1/2 power of gas hot water heaters under the same heat status. It will save you a lot of energy fees and reduce operating costs significantly with the long-term use.
It is equipped with a large flow channel, high-efficiency and anit-corrosion heat exchanger and it can fundamentally settle the shortcomings of traditional plate heat exchangers. It can not only avoid scaling, poor frost resistance and difficult cleaning caused by narrow flow channels and it can also maintain efficient heat exchange performance during the long-term use. Its excellent anti-corrosion significantly lengthens the machines’ usage life.
Safety is top priority to the commercial hot water machines. TENESUN commercial hot water air source heat pumps adopt a closed design with complete separation of water and electricity and this completely eliminates safety risks such as electrical and water leakage. Furthermore, the machines are equipped with multiple safe protection measures, such as high and low pressure protection, compressor’s over-current and overload protection, start-up delay, water flow protection, water temperature’s high temperature protection and so on to ensure safe operation in any conditions. In addition, there is no need to use fuel delivery pipeline for TENESUN air source heat pumps and it will avoid the risks of fuel leaks, fire and explosion and there is no worry when use.
It supports the self-defined assembly configurations and can be flexibly assembled according to the house space, structure and usage habits to meet different system needs and make you to customize a comfortable life.
TENESUN commercial hot water air source heat pumps are equipped with an intelligent control system which can automatically adjust water temperature, water volume and operating time refer to your actual needs. With automatic microcomputer-controlled operation, it can start and stop according to the water tank’s temperature and usage and there is no need for you to supervise anytime. You can also casually set the machines' automatic on/off times to further reduce operating costs. Furthermore the machines have an automatic constant temperature function. When the water in the water tank cools down due to long-term storage, it will automatically activate to heat to ensure a constant water temperature. In addition, the water temperature can be adjusted casually from 40°C to 60°C to meeting the different needs of different venues and users.
